TOKO T-14 DIGITAL IRON
All Oracover®, Orastic®, Oratex® and Easycoat® products can be precisely processed with this sheet iron.
Continuous temperature control from 100°C to 160°C
The built-in microprocessor monitors temperature fluctuations.
Strong cast aluminum plate for optimal heat retention.
Storage bag included
AERONAUT COVERING IRON
Adjustable heat control por any heat shrink film or fabric covering.
Teflon coated shoe
Cloth sock and rest stands included
COVERING IRON SMALL SHOE
Adjustable two positions heat control por any heat shrink film or fabric covering.
Teflon coated shoe
Perfect sealing iron for those hard-to-reach areas, small details, trim lines etc.
Exchangeable iron shoe flat and round included
Aluminium stand included
CLOTH SOCK
Cotton cloth sock prevent sticking to the shoe. Compatible with most of covering irons of the market
PERMA-GRIT TOOLS
Tungstene carbide Abrasives
KT1F Set of 8 pieces FINE grade
KT1C Set of 8 pieces COARSE grade
You can use in all types of rotary machines as Proxxom, Dremmel…
PERMA-GRIT SMALL FILES
Tungstene carbide Abrasives
Set of 5 files and handle.
PERMA -GRIT Flat
F-101 Flat file fine 230 x 38 x 1,5 mm
F-102 Flat file Coarse 230 x 38 x 1,6 mm
PERMA -GRIT Curved
R-101 13 mm radius INT. GRIT fine
R-102 13 mm radius INT. GRIT coarse
PERMA-GRIT Superlong
560 x 53 mm
One side Fine and the
other side coarse over aluminium handle
STAINESS STEEL SCALPEL
Its a quality Stainess steel scalpel with very low weight for easy handling, due that it is hollow. Only 44 grams. Comes with two spares blades #11
LAPPING TOOL SET
LAPPING TOOL AVAILABLE IN FOUR SIZES..!!
Most control line engines do not make use of a piston ring to maintain compression, The work of the piston ring is done by a narrow sealing band close to the piston crown, sized to fit the liner at working temperature.
The appearance on the piston wall of scratches, streaked or matt surfaces indicates friction that causes heat build up & poor performance…. click on photo for more information.
PISTON LAPPING TOOLS AVAILABLE FOR THIS ENGINE. Get more performances from your engine..!!
FLIGHT FIELD GAS IRON
Portable flight field gas iron not necesary courrent connection. Runs with lighter gas and you can make corrections anywere without courrent connection. Ideal for COMBAT MODELS.
MULTIWRENCH 2017
Five in one wrench.
This is a new compact multi wrench suitable for all Parra engines and other F2D Combat engines.
Side A: fits to rear cover of Parra 2.5, Wasp 1.5, T3, T4 engines
Side B: Remove MS-F2D and Fora F2D front BB cover
Side C: fits to head clamp of Parra 2.5, Wasp 1.5, T3, T4 engines, MS-F2D and Fora F2D
Side D: fits to propeller nuts of Parra 2.5, Wasp 1.5, T3, T4 engines, MS-F2D and Fora F2D. Also fits to Nelson Glow plug and TCA Italian glow plugs.
FRONT BALL BEARING EXTRACTION